SUPER MICRO Computer SBI-7426T-S3 Saw Kullanım Kılavuzu

Kullanım Kılavuzu için aygıtı SUPER MICRO Computer SBI-7426T-S3 Saw

SUPER MICRO Computer SBI-7426T-S3 Saw Kullanım Kılavuzu

İçeriğini ayıklar

No Özeti sayfasında içerik 1

SBI-7426T-S3Blade ModuleUser’s ManualRevison 1.0a

No Özeti sayfasında içerik 2

SBI-7426T-S3 Blade Module User’s ManualThe information in this User’s Manual has been carefully reviewed and is believed to be accurate. Thevendor assumes no responsibility for any inaccuracies that may be contained in this document, makes nocommitment to update or to keep current the information in this manual, or to notify any person ororganization of the updates. Please Note: For the most up-to-date version of this manual, please seeour web site at www.supermicro.com.Super Micro Computer,

No Özeti sayfasında içerik 3

PrefaceAbout this ManualThis manual is written for professional system integrators, Information Technologyprofessionals, service personnel and technicians. It provides information for theinstallation and use of Supermicro's SBI-7426T-S3 blade module. Installation andmaintenance should be performed by experienced professionals only.Manual OrganizationChapter 1: IntroductionThe first chapter provides a checklist of the main components included with theSBI-7426T-S3 blade module and describes its ma

No Özeti sayfasında içerik 4

SBI-7426T-S3 Blade Module User’s ManualNotesiv

No Özeti sayfasında içerik 5

Table of ContentsChapter 1 Introduction....................................................................... 1-11-1 Overview ............................................................................................. 1-11-2 Product Checklist of Typical Components..................................... 1-11-3 Blade Module Features .................................................................... 1-2Processors ...................................................................................

No Özeti sayfasında içerik 6

SBI-7426T-S3 Blade Module User’s Manual3-9 Configuring and Setting up RAID ................................................. 3-12Chapter 4 Blade Module Features .............................................. 4-14-1 Control Panel ..................................................................................... 4-2Power Button .......................................................................................... 4-3KVM Button...............................................................

No Özeti sayfasında içerik 7

Appendix A BIOS POST Codes ....................................................A-1A-1 BIOS POST Messages ....................................................................A-1A-2 BIOS POST Codes ...........................................................................A-3Recoverable POST Errors ......................................................................A-4Terminal POST Errors.............................................................................A-4vii

No Özeti sayfasında içerik 8

SBI-7426T-S3 Blade Module User’s ManualNotesviii

No Özeti sayfasında içerik 9

List of FiguresFigure 1-1. Full Rack of Blade Enclosures and Blade Servers ......................... 1-3Figure 3-1. Inserting a Blade into the Enclosure ............................................... 3-3Figure 3-2. Locking the Blade into Position....................................................... 3-3Figure 3-3. Installing a Processor in a Socket................................................... 3-5Figure 3-4. Installing the Onboard Battery ..................................................

No Özeti sayfasında içerik 10

SBI-7426T-S3 Blade Module User’s ManualNotesx

No Özeti sayfasında içerik 11

List of TablesTable 1-1. SBI-7426T-S3 Blade Specification Features ................................... 1-2Table 3-1. Populating Twelve Memory Slots for Interleaved Operation............ 3-6Table 4-1. SBI-7426T-S3 Blade Module Features ............................................ 4-1Table 4-2. Blade Control Panel ......................................................................... 4-2Table 4-3. Blade Module LED Indicators .......................................................... 4-3Table 4-

No Özeti sayfasında içerik 12

SBI-7426T-S3 Blade Module User’s ManualNotesxii

No Özeti sayfasında içerik 13

Chapter 1Introduction1-1OverviewThe SBI-7426T-S3 blade module is a compact self-contained server that connects into apre-cabled enclosure that provides power, cooling, management and networkingfunctions. One enclosure for the SBI-7426T-S3 blade module can hold fourteen bladeunits.In this manual, “blade system” refers to the entire system (including the enclosure andblades units), “blade” or “blade unit” refers to a single blade module and “bladeenclosure” is the chassis that the

No Özeti sayfasında içerik 14

SBI-7426T-S3 Blade Module User’s Manual1-3Blade Module FeaturesTable 1-1 lists the main features of the SBI-7426T-S3 blade module. See the proceedingsection for components typically included in a blade system and other optionalcomponents. Specific details on the SBI-7426T-S3 blade module is found in Chapter 4: "Blade Module Features" on page 4-1.Table 1-1. SBI-7426T-S3 Blade Specification FeaturesMainboardB8DT6 (proprietary form factor)Chassis Dimensions (HxWxD): 11.32” x 1.67” x 18.9”Pr

No Özeti sayfasında içerik 15

Chapter 1: IntroductionStorageThe SBI-7426T-S3 blade module can have three 2.5" SAS2 or SATA (Serial ATA) harddisk drives in front-mounted easy removable carriers. See Chapter 3: "Setup andInstallation" on page 3-1 for storage installation details.DensityA maximum of fourteen blade modules may be installed into a single blade enclosure.Each blade enclosure is a 7U form factor, so a standard 42U rack may accommodate upto six enclosures with sixty blade modules, or the equivalent of sixty 1U serve

No Özeti sayfasında içerik 16

SBI-7426T-S3 Blade Module User’s Manual1-4Contacting SupermicroHeadquartersAddress:Super Micro Computer, Inc.980 Rock Ave.San Jose, CA 95131 U.S.A.Tel:Fax:+1 (408) 503-8000+1 (408) 503-8008marketing@supermicro.com (General Information)Email:support@supermicro.com (Technical Support)Web Site:www.supermicro.comEuropeAddress:Super Micro Computer B.V.Het Sterrenbeeld 28, 5215 ML‘s-Hertogenbosch, The NetherlandsTel:+31 (0) 73-6400390Fax:+31 (0) 73-6416525sales@supermicro.nl (General Information)E

No Özeti sayfasında içerik 17

Chapter 2System Safety2-1Electrical Safety PrecautionsBasic electrical safety precautions should be followed to protect yourself from harm andthe SuperBlade from damage:•Be aware of how to power on/off the enclosure power supplies and the individualblades as well as the room's emergency power-off switch, disconnection switch orelectrical outlet. If an electrical accident occurs, you can then quickly remove powerfrom the system.•Do not work alone when working with high voltage components.•P

No Özeti sayfasında içerik 18

SBI-7426T-S3 Blade Module User’s Manual2-2General Safety PrecautionsFollow these rules to ensure general safety:•Keep the area around the SuperBlade clean and free of clutter.•Place the blade module cover and any system components that have been removedaway from the system or on a table so that they won't accidentally be stepped on.•While working on the system, do not wear loose clothing such as neckties andunbuttoned shirt sleeves, which can come into contact with electrical circuits or

No Özeti sayfasında içerik 19

Chapter 3Setup and Installation3-1OverviewThis chapter covers the setup and installation of the blade module and its components.3-2Installing Blade ModulesUp to fourteen SBI-7426T-S3 blade modules may be installed into a single bladeenclosure (depending upon your enclosure and blad). Blade modules with Windows andLinux operating systems may be mixed together in the same blade enclosure.Powering Up a Blade UnitEach blade unit may be powered on and off independently from the rest of the bladesinst

No Özeti sayfasında içerik 20

SBI-7426T-S3 Blade Module User’s ManualNOTE: Blade Modules can be Hot-Plugged from the enclosure.Removing/Replacing the Blade CoverThe blade cover must be removed to access the mainboard when you need to install orremove processors, memory units, the onboard battery and so on.Removing/Replacing the Blade Cover1. Remove the blade unit from the enclosure (see "Removing a Blade Unit from theEnclosure" above).2. Depress the two buttons on the cover while pushing the cover toward the rear of thebla

BİR YORUM BIRAK