Asus ML249 Home Theater Screen Kullanım Kılavuzu

Kullanım Kılavuzu için aygıtı Asus ML249 Home Theater Screen

Asus ML249 Home Theater Screen Kullanım Kılavuzu

İçeriğini ayıklar

No Özeti sayfasında içerik 1

ML249 SeriesLED MonitorUser Guide

No Özeti sayfasında içerik 2

E6236First EditionJanuary 2011Copyright © 2011 ASUSTeK COMPUTER INC. All Rights Reserved.No part of this manual, including the products and software described in it, may be reproduced,transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by anymeans, except documentation kept by the purchaser for backup purposes, without the express writtenpermission of ASUSTeK COMPUTER INC. (“ASUS”).Product warranty or service will not be extended if: (1) th

No Özeti sayfasında içerik 3

ContentsNotices.......................................................................................................... ivSafety information........................................................................................ vCare & Cleaning........................................................................................... viChapter 1:Product introduction1.1 Welcome! ..................................................................................... 1-11.2 Package contents.......

No Özeti sayfasında içerik 4

NoticesFederal Communications Commission StatementThis device complies with Part 15 of the FCC Rules. Operation is subject to thefollowing two conditions:• This device may not cause harmful interference, and• This device must accept any interference received including interference thatmay cause undesired operation.This equipment has been tested and found to comply with the limits for aClass B digital device, pursuant to Part 15 of the FCC Rules. These limits aredesigned to provide reasonable

No Özeti sayfasında içerik 5

Safety information• Before setting up the monitor, carefully read all the documentation that camewith the package.• To prevent fire or shock hazard, never expose the monitor to rain or moisture.• Never try to open the monitor cabinet. The dangerous high voltages inside themonitor may result in serious physical injury.• If the power supply is broken, do not try to fix it by yourself. Contact a qualifiedservice technician or your retailer.• Before using the product, make sure all cables

No Özeti sayfasında içerik 6

Care & Cleaning• Before you lift or reposition your monitor, it is better to disconnect the cablesand power cord. Follow the correct lifting techniques when positioning themonitor. When lifting or carrying the monitor, grasp the edges of the monitor.Do not lift the display by the stand or the cord.• Cleaning. Turn your monitor off and unplug the power cord. Clean the monitorsurface with a lint-free, non-abrasive cloth. Stubborn stains may be removedwith a cloth dampened with mild cleaner.•

No Özeti sayfasında içerik 7

Where to find more informationRefer to the following sources for additional information and for product andsoftware updates.1. ASUS websitesThe ASUS websites worldwide provide updated information on ASUShardware and software products. Refer to http://www.asus.com2. Optional documentationYour product package may include optional documentation that may havebeen added by your dealer. These documents are not part of the standardpackage.vii

No Özeti sayfasında içerik 8

1.1 Welcome!Thank you for purchasing the ASUS® LED monitor!The latest widescreen LED monitor from ASUS provides a crisper, broader, andbrighter display, plus a host of features that enhance your viewing experience.With these features, you can enjoy the convenience and delightful visualexperience that the monitor brings to you!1.2 Package contentsCheck your package for the following items:LED monitorMonitor arm & baseQuick start guideWarranty cardPower cord + power adapterVGA cableHDMI-DVI cable

No Özeti sayfasında içerik 9

1.3 Monitor introduction1.3.1 Front view11. 23456button:• Selects a desired preset mode.• Exits the OSD menu or goes back to the previous menu when the OSDmenu is active.• Automatically adjusts the image to its optimized position, clock, and phaseby touching this button for 2-4 seconds (for VGA mode only).• Decreases values or moves your selection left/down.• Contrast hotkey2. 3. MENU button:• 1-2Turns on the OSD menu. Enacts the selected OSD menu item.Chapter 1: Product introduction

No Özeti sayfasında içerik 10

4. • Increases values or moves your selection right/up.• Brightness hotkey• Selects an available input source.5. button:6. Power button/power indicator• Turns the monitor on/off.• The color definition of the power indicator is as the below table.1.3.2 StatusDescriptionWhiteWhite (fitful)OFFONStandby modeOFFBack viewRear connectors1. DC-IN port. This port connects the power cord.2. VGA port. This 15-pin port is for PC VGA connection.3. HDMI port. This port is for connection with an HDMI

No Özeti sayfasında içerik 11

1-4Chapter 1: Product introduction

No Özeti sayfasında içerik 12

2.1 Assembling the monitor arm/baseTo assemble the monitor arm/base:1. Have the front of the monitor face down on a table.2. Place the circular arm on the back of the monitor by aligning the pins on thearm with the slots on the monitor. Use a coin or the like to turn the screw untilthe circular arm is securely attached to the monitor. Put the screw cover on thescrew.3. Attach the circular base to the arm by using a coin or the like to turn the screwuntil the circular base is securely attached to

No Özeti sayfasında içerik 13

2.2 Adjusting the monitor• or optimal viewing, we recommend that you look at the full face of the monitor,Fthen adjust the monitor to the angle that is most comfortable for you.• Hold the stand to prevent the monitor from falling when you change its angle.• ou can adjust the monitor’s angle from +20˚ to -5˚ and it allows 20˚ swivelYadjustment from either left or right.-52020º0º20ºIt is normal that the monitor slightly shakes while you adjust the viewing angle.2-2Chapter 2: Setup

No Özeti sayfasında içerik 14

2.3 1. • Connecting the cablesConnect the cables as the following instructions:To connect the power cord:a. Connect the power adapter securely to the monitor’s DC input port.b. Connect one end of the power cord to the power adapter and the otherend to a power outlet.• To connect the VGA/HDMI-DVI cable:a. Plug one end of the VGA/HDMI-DVI cable to the monitor’s VGA/HDMIport.b. Connect the other end of the VGA/HDMI-DVI cable to your computer'sVGA/DVI port.• c. Tighten the two screws to se

No Özeti sayfasında içerik 15

2-4Chapter 2: Setup

No Özeti sayfasında içerik 16

3.1 OSD (On-Screen Display) menu3.1.1 How to reconfigure1. Tap the MENU button to activatethe OSD menu.2. Tap, andtonavigate through the functions.Highlight the desired functionand tap the MENU button toactivate it. If the function selected has a sub-menu, tapandagain to navigate through the sub-menu functions. Highlight the desired submenu function and tap the MENU button to activate it.3. Tap4. To exit and save the OSD menu, tap thebutton repeatedly until theOSD menu disappears. To adjust othe

No Özeti sayfasında içerik 17

2. ColorYou can adjust Brightness,Contrast, Saturation, ColorTemp., and Skin Tone from thismenu.• Brightness: the adjustingrange is from 0 to 100.is a hotkey to activate thisfunction.• Contrast: the adjusting range is from 0 to 100.activate this function.• Saturation: the adjusting range is from 0 to 100.• Color Temp.: contains four modes including Cool, Normal, Warm, andUser Mode.Skin Tone: contains three color modes including Reddish, Natural, andYellowish.• is a hotkey toIn the User

No Özeti sayfasında içerik 18

4. Input SelectIn this function, you can selectyour desired input source.5. System SetupAllows you to adjust the system.• Splendid Demo Mode:splits the screen into two forSplendid modes comparison.• Volume: the adjusting range is from 0 to 100 (only available for the HDMIinput).• ECO Mode: reduces power consumption.• OSD Setup:* Adjusts the horizontal position (H-Position)/the vertical position(V-Position) of the OSD from 0 to 100.* Adjusts the OSD timeout from 10 to 120 seconds.* Enable

No Özeti sayfasında içerik 19

3.2 Specifications summary (ML249H)Panel TypePanel sizeMax. ResolutionPixel pitchBrightness (Max.)Contrast Ratio (Typ.)Contrast Ratio (Max.)Viewing angle(H/V) CR>10Display colorsResponse timeSPLENDID™ VideoEnhancementSPLENDID™ selectionAuto adjustmentColor temperature selectionSkin-Tone selectionDigital inputAnalog inputEarphone jackColorsPower LEDTiltSwivelKensington lockAC/DC adaptor inputvoltageTFT LCD24" (16:9, 61 cm) wide screen1920 x 10800.2768 mm250 cd/m23000:150,000,000:1 (with ASCR

No Özeti sayfasında içerik 20

3.3 Troubleshooting (FAQ)ProblemPower LED is not ONThe power LED lights amber and there isno screen imageScreen image is too light or darkPossible Solution• Tap the button to check if the monitor isin the ON mode.• Check if the power cord is properlyconnected to the monitor and the poweroutlet.• Check if the monitor and the computer arein the ON mode.• Make sure the signal cable is properlyconnected the monitor and the computer.• Inspect the signal cable and make surenone of the pins a

BİR YORUM BIRAK